Loading...
Serving Pembroke Pines, FL and surrounding areas. (754) 294-8319
Bare, stained concrete drags down any space. Metallic epoxy turns that same slab into a seamless, glossy surface that holds up to South Florida heat, slab moisture, and storm season use.
Metallic epoxy flooring in Pembroke Pines is a thick, glossy coating applied directly over your existing concrete slab - it contains fine metallic powder that swirls and shifts as it cures, creating a one-of-a-kind look, and most residential garage or interior jobs take two to three days total.
If your garage, lanai, or interior concrete floor looks dull, stained, or unfinished, metallic epoxy is one of the most dramatic upgrades you can make without replacing the slab. The coating seals the surface, resists spills, and gives you something that looks more like polished stone than painted concrete. Homeowners in Pembroke Pines deal with a high water table and year-round humidity that can destroy coatings applied without a proper moisture test - that step is built into every job we do.
If you need a more industrial-grade surface for a commercial space or commercial kitchen, we also install urethane cement flooring built specifically for high-moisture and heavy-traffic environments. For homeowners focused on garages specifically, our standard epoxy floor coatings offer a practical, cost-effective option alongside the metallic finish.
If your floor has oil stains, tire marks, or a gray, lifeless appearance that no amount of sweeping improves, it is a strong candidate for metallic epoxy. The coating covers surface discoloration completely and transforms the look of the space without requiring you to replace the slab.
White powder or chalky residue near the edges of the room is a sign that moisture is moving up through the slab from below. In Pembroke Pines, where the water table is high, this is common in homes built on slabs. A moisture-blocking primer applied before the coating prevents the epoxy from bubbling and peeling.
If your current painted or coated floor is starting to lift in patches, the original prep work was not done correctly. Metallic epoxy installed over properly prepared concrete bonds far more durably - but the old coating must be fully removed first, which any reputable contractor will address in the estimate.
Many Pembroke Pines homeowners convert garages into living or workout spaces, or upgrade screened lanais and laundry rooms. If concrete is the last unfinished element in a renovation, metallic epoxy is a cost-effective way to give the space a high-end look without the expense of tile or hardwood.
Every metallic epoxy job starts with mechanical surface preparation - we grind the concrete so the coating bonds properly - followed by a moisture test. If the slab is holding water, a moisture-barrier primer goes on before the first coat. This is non-negotiable in Pembroke Pines, where slab moisture is one of the most common reasons coatings fail within the first year.
The metallic layer itself is applied in a base coat, then a metallic pigment coat manipulated into swirling patterns while it is still wet, then finished with a clear protective topcoat. For homeowners who want a floor that performs as well as it looks, we apply a urethane cement or polyaspartic topcoat rated for UV stability - critical in Florida, where intense sun can yellow a standard topcoat over time. Homeowners upgrading from a basic painted floor often also find our standard epoxy floor coatings a practical starting point before committing to a full decorative system.
A clean, uniform metallic sheen - good for homeowners who want the premium look without a complex design.
Two or more metallic pigments blended on the floor to create depth and movement - the most popular choice for showroom-style garages.
A high-contrast design that mimics natural stone or water - suited to interior spaces and renovated lanais where visual impact matters.
The right protective layer for any space that receives direct sunlight - resists yellowing and heat-related softening in South Florida conditions.
Pembroke Pines sits in Broward County on low-lying land with a naturally shallow water table. Concrete slabs here are almost always holding some moisture, even when the floor looks and feels dry. Most of the city was built out between the 1970s and 1990s, so many slabs are now 30 to 40 years old - more likely to have surface cracks, previous sealer applications, or areas of spalling that need repair before a coating can be applied cleanly. A contractor who does a thorough on-site assessment before quoting will find these issues and include them in the estimate, not surprise you with them mid-project.
South Florida homeowners also use their garages differently than most - storing hurricane shutters, generators, and outdoor furniture before storms, then cleaning up after. Homeowners in Hollywood and Miramar routinely schedule metallic epoxy projects in the spring - before hurricane season peaks - so the floor is fully cured and ready for that kind of heavy, repeated use by the time storm prep begins in June. A metallic epoxy floor also cleans up far faster after a flooding event than bare concrete, which matters in a city that averages around 60 inches of rain each year.
We will ask a few quick questions about your space - size, current condition, and what you are hoping to achieve. We reply within one business day and can usually schedule a free on-site visit within the same week.
We inspect the slab up close, check for cracks, old coatings, and staining, and test for moisture. In Pembroke Pines, this moisture test is especially important - elevated readings mean we apply a moisture-blocking primer before anything else.
Before the crew arrives, move vehicles, furniture, and stored items off the floor. We handle grinding the surface, repairing any cracks or divots, and cleaning up the prep dust before any product goes down.
Base coat, metallic pigment layer, then a protective topcoat - each needs curing time before the next goes on. The crew manipulates the metallic pigment into the pattern you chose during the design consultation.
Free on-site estimate. We test for moisture before we quote. No obligation.
(754) 294-8319We test your slab for moisture before the first coat goes down - every single time. In Broward County, where the water table sits close to the surface, this step is what separates floors that bond permanently from ones that bubble and peel within months. We do not skip it regardless of how the slab looks.
We use clear protective topcoats rated for UV stability - important for any garage or interior space that receives direct sunlight. Standard topcoats yellow over time under Florida's intense sun. Ours are selected specifically for South Florida conditions, so your floor looks the same in year three as it did on day one.
We have worked on homes up and down Pines Boulevard, in Silver Lakes, Chapel Trail, and every neighborhood in between. That local track record means we understand what older Broward County slabs look like and how to handle the issues that come up in homes built during the 1980s and 1990s.
We assess your slab thoroughly before quoting - so the number you agree to is the number you pay. Older slabs sometimes need extra prep or crack repair. We find those things before work starts, include them in the written estimate, and do not revisit the price once the crew is on-site.
Every one of those proof points leads to the same thing - a floor that looks right and stays right. We stand behind our installs, and the homeowners we work with know they can call us if anything ever looks off after the job is done.
You can verify any Florida contractor license in under a minute at the Florida Department of Business and Professional Regulation. The American Society of Concrete Contractors also publishes installation best practices that any serious contractor follows.
A seamless, moisture-tolerant coating built for high-traffic spaces and slabs with active moisture challenges.
Learn MoreA practical, durable base coating for residential garages and interior slabs - solid color or flake finishes available.
Learn MoreInstallation slots fill up before hurricane season - contact us now to lock in your date and get a written quote with no obligation.