Loading...
Serving Pembroke Pines, FL and surrounding areas. (754) 294-8319
Pembroke Pines Epoxy is a Concrete Flooring Contractor serving Sunrise, FL, specializing in polyaspartic floor coatings, pool deck resurfacing, and garage floor systems for Sunrise homeowners in a city built primarily from the 1970s through the 1990s. We have served Broward County since 2020 and respond to estimate requests within one business day.
Sunrise gets intense UV year-round and heavy rain from June through September, which breaks down standard epoxy faster in outdoor and semi-outdoor spaces than most homeowners expect. Our polyaspartic coating systems cure faster, resist UV yellowing, and hold up to pool areas and covered patios where a standard epoxy would need replacing within a few seasons.
Screened enclosures and pool decks are standard on Sunrise ranch homes, and those concrete surfaces are exposed to direct sun, heavy rain, and foot traffic year-round. A slip-resistant, UV-stable coating system restores the deck surface, addresses minor surface spalling, and prevents the surface from becoming uncomfortable or unsafe from years of weather exposure.
Most Sunrise homes were built between the 1970s and 1990s, and those garage slabs have had 30 to 50 years of oil, road salt, and moisture working into unprotected concrete. Proper diamond grinding, moisture vapor testing, and an epoxy or polyaspartic system gives those slabs a durable surface that can actually be cleaned and maintained rather than just stained darker year by year.
Sunrise sits on flat terrain with a water table that is high year-round, and the city borders the Everglades to the west - which means the soil beneath driveways and walkways stays wet longer after rain than in most parts of South Florida. Sealing concrete surfaces creates a barrier against moisture infiltration from both above and below, slowing the pitting and surface degradation that bare concrete accumulates in this environment.
Sunrise homeowners replacing dated flooring in 1970s and 1980s homes often find a solid CBS concrete slab underneath the existing tile or vinyl. Grinding and polishing that slab produces a reflective, low-maintenance surface that handles humidity without warping or cupping the way wood flooring can in this climate.
Driveways and patios in Sunrise crack as seasonal wet-dry cycles move the flat, moisture-retaining soil beneath the slab. A bonded overlay resurfaces cracked and worn concrete to a smooth finish without the cost and mess of full demolition and replacement - a practical option for Sunrise homeowners who need to keep the property looking maintained without a major project.
Sunrise was incorporated in 1961 and built out rapidly through the 1970s and 1980s as developers laid out large planned subdivisions across western Broward County. That means most of the city's roughly 100,000 residents live in concrete block and stucco homes that are now 30 to 50 years old. At that age, garage slabs, pool decks, driveways, and covered patios have had decades of South Florida heat, UV, and storm rain working on them. The city gets afternoon thunderstorms almost every day from June through September, and the flat terrain means standing water around foundations and driveways is common for hours after each storm. That moisture cycle accelerates concrete surface wear and drives moisture vapor up through slabs - which is the most common reason floor coatings delaminate in this market.
Sunrise also borders the Everglades to the west, which means homes on the western side of the city sit on soil with very high organic content and moisture retention. Contractors who do not test for moisture vapor emission before applying a coating system to those slabs end up with blisters and delamination within a year. We treat moisture testing as a standard first step on every Sunrise job - indoor or outdoor - because the soil and water table conditions here make it a requirement, not a precaution.
Our crew works throughout Sunrise regularly, and we understand the local conditions that affect concrete flooring work here. The neighborhoods on the western side of the city - nearest to the Everglades conservation boundary along the western edge of the city limits - consistently show higher moisture vapor readings than those on the eastern side closer to Sunrise Boulevard and University Drive. We adjust our product selection and primer approach based on where in Sunrise the project sits, because a system that cures correctly in one part of the city can have adhesion problems in another without the right vapor mitigation step.
Sawgrass Mills on Flamingo Road is the most widely recognized landmark in Sunrise - one of the largest outlet malls in the country and a reference point most residents navigate by. Amerant Bank Arena, home to the Florida Panthers NHL team, sits near the intersection of Sunrise Boulevard and NW 136th Avenue and anchors the western part of the city. Markham Park on State Road 84 is a large Broward County park that longtime Sunrise residents know well, and many of the homes near that park are among the older single-family neighborhoods in the city.
We also serve homeowners in Lauderhill, which borders Sunrise to the east, and in Plantation, which sits to the south - so our crew moves regularly through this corridor of central and western Broward County.
Call us at (754) 294-8319 or submit a request through the estimate form on this site. We respond to all Sunrise inquiries within one business day and will find a time that works for you to visit the site.
We visit the property, measure the area, test the slab for moisture vapor transmission, and assess any cracks, surface damage, or previous coatings. You receive a written estimate before any work begins. There are no cost surprises after the project starts.
We grind the slab, address cracks, apply primer and base coats, and finish with the selected system. Most Sunrise residential projects are completed in one to two days. You do not need to be present during the work if access has been arranged beforehand.
Most systems are ready for foot traffic within 24 hours and vehicle traffic within 48 to 72 hours. We walk through the finished space with you, cover care and maintenance instructions, and confirm the work meets your expectations before we leave.
We serve all of Sunrise - from neighborhoods near Sawgrass Mills to the quieter streets near Markham Park. No obligation. Response within one business day.
(754) 294-8319Sunrise is a city of about 100,000 people in western Broward County, incorporated in 1961 and built out through the 1970s and 1980s as a fully planned suburb. The city is almost entirely built out today, with a mix of single-family ranch homes, townhomes, and condo communities - most of them concrete block and stucco construction with attached garages, screened lanais, and backyard pools. The western edge of Sunrise runs directly against the Everglades conservation area, making it one of the westernmost cities in Broward County. Sawgrass Mills on Flamingo Road is the city's most recognized landmark, drawing visitors from across South Florida. Amerant Bank Arena - home of the Florida Panthers - is another well-known anchor in the western part of the city. Learn more from the Sunrise, Florida Wikipedia article.
Roughly 60% of Sunrise housing units are owner-occupied, and the median home value sits around $350,000. Most residents own single-family homes that were built when the city was growing and are now entering the maintenance cycle that older South Florida properties go through - roofs, floors, pool decks, and driveways that have handled two or three decades of heat, humidity, and hurricane seasons. We serve homeowners throughout Lauderhill to the east and Plantation to the south, and we bring the same attention to moisture conditions and slab prep to every project across this part of western Broward County.
Heavy-duty epoxy systems built for demanding commercial and industrial environments.
Learn MoreFast-curing polyaspartic coatings that resist scratches, stains, and UV fading.
Learn MoreStunning metallic finishes that create a one-of-a-kind decorative floor.
Learn MoreChemical- and thermal-resistant urethane cement ideal for tough wet areas.
Learn MoreHigh-gloss polished concrete that is low-maintenance and long-lasting.
Learn MoreRich acid or water-based stains that add lasting color to concrete.
Learn MoreClassic terrazzo flooring combining durability with timeless visual appeal.
Learn MoreProfessional grinding and prep work that ensures every coating bonds properly.
Learn MorePenetrating and topical sealers that guard concrete from water and stains.
Learn MoreRestore worn or damaged concrete with a fresh, decorative overlay.
Learn MoreSmooth self-leveling overlays that correct uneven floors before coating.
Learn MoreSlip-resistant, UV-stable coatings that refresh and protect pool decks.
Learn MoreComplete removal of old coatings and adhesives to prepare for a fresh start.
Learn MoreCall us today or submit an estimate request. We serve all of Sunrise and respond within one business day - before the next storm season adds more wear to your slab.